In this post let us see three DIYs of making safety pins ring, fabric flip flop and paper umbrella.
How to make DIY safety pins ring?
Materials required to make ring using safety pins:
- Safety pins
- Elastic
- Beads thread
DIY Method of preparing safety pins ring :
1. Get some small safety pins and some beads of your favourite colour.
2. Insert the beads into the safety pins.
3. Take two elastic threads.
4. Insert the safety pins into the elastic threads one at a time until it is long enough to fit your finger.
5. Make some tight knots at the end of the elastic threads.
How to make DIY fabric flip flop?
Materials required to make fabric flip flop:
- Flips flops
- Fabric strips
- Craft knife
- Hot glue
Method of preparing DIY fabric flip flop
1. Using a craft knife, cut off and remove the straps of the flip flops.
2. Take two fabric strips of fabric and insert them into the top hole of the flipflop as shown.
3. Tie a knot in the back.
4. Tie two knots at the top as shown and then the fabric into one hole each and tie knots at the back to hold them in place.
5. Cut off the excess fabric and apply some hot glue over the knots at the back to hold it in place.
How to make DIY Paper Umbrella?
Materials required to make DIY paper umbrella:
- Craft paper
- Scissors
- Fevistick
- Hot glue gun
- Toothpick/thin stick
- Pearl/bead
- Bead-cap
Method of preparing DIY paper umbrella:
1. Cut several circles of radius 5 cm from a craft paper.
2. Fold all the circles in half.
3. Fold in half again. Crease well and unfold.
4. Apply some glue near the crease lines and fold again as shown in the video.
5. Flatten the two loops formed as shown.
6. Apply some glue on the folded corner of one circle and paste another folded circle on it.
7. Repeat this until all the circles have been stuck together.
8. Paste the two ends together.
9. Using some hot glue, stick a pearl or bead on the top center.
10. Similarly, use some hot glue and stick a toothpick or thin stick at the bottom center.
11. Insert a bead-cap at the end as shown.
